10"-15" Wedge Type Quick Change Tool Post 6 Pcs/Set for 200 BXA, plus 2 ps Extra XL Oversize Toolholders (0251-0201XL), #0251-0228

• Quick Change Tool Post Sets(USA STYLE), Wedge Type Toolpost sets(6 Piece Sets)
• Each set consists of one Wedge type tool post and one or two of each of the following 5 tool holders:
  • Wedge Style Quick Change Tool Post with T-type Bottom Plate, #0252-0222
  • Style 1: Turning & Facing, #0250-0201
  • Style 1: Extra XL Oversize Turning & Facing, #0250-0201T (2 pieces)
  • Style 2: Boring Turing & Facing, #0250-0202
  • Style 4: Boring, Heavy-duty, #0250-0204
  • Style 7: Universal Parting Blades, #0250-0207
  • Style 10: Knurling, Facing & Turning, #0250-0210
• Lathe Swing: 10"-15" Each 1 pc: 0250-0222, 0250-0201, 0250-0201XL(2), 0250-0202, 0250-0204, 0250-0207, and 0250-0210
• All parts are hardened, ground and completely sealed for maintenance-free operation. Quick change QC tool post sets advanced design provides built-in quick tool changing versatility with positive rigidity to meet the most exacting working tolerances. Quickly and easily installed on an engine bench or turret lathe quick change QC tool post sets perform a wide range of operations from fine precise work to heavy-duty cutting. Maximum rigidity for chatter-free performance. Quick change QC tool post sets are interchangeable with all industry-leading brands by series

Interchangeable with Aloris, Phase II, Dorian, Yuasa. Suitable for lathe center height 0.70 - 2.20" (From top compound surface to lathe centerline), such as:

• South Bend 13" , 14" & 1307 ,
• Harrison: 11, 12 & 13"
• Clausing: 1300 series
• Delta 14"
• Logan 14"
• Emco: Elnomat 13S
• Sheldon: 11 & 13"
• Monarch: 13
• Nardini: MS1400 MS1600
• Acer: 1340
• and many other important lathes.

Specifications

Style 1: Turning and Facing Holders, 250-201

• A: 1-1/8'',
• B: 5/8'',
• C: 1/2'',
• D: 1-3/4''
• For Lathe Swing 10"-15''

Style 1: Turning and Facing Holders, Oversize, 250-201T

• A: 1-1/8'',
• B: 3/4'',
• C: 1/2'',
• D: 1-3/4''
• For Lathe Swing 10"-15''
• Comes with 2 pieces

Style 2: Boring Turing & Facing, 250-202

• A: 1-1/8'',
• B: 5/8'',
• C: 1/2'',
• D: 1-3/4'',
• Shank: 1/2''

Specifications

Style 4: Boring, Heavy duty, 0250-0204

• A: 7/8'',
• B: 1-3/4'',
• D: 1''

Style 7: Universal Parting Blade Holder, 250-207

• A: 1''
• B: 11/16''
• C: 13/16''
• D: 1-3/4''
• Blade Height: 11/16"

Style 10: Knurling, Turning, and Facing Holder, 250-210

• A: 1'',
• B: 2-5/8'',
• C: 1-3/4'',
• E: 5/8''
• Tool Bit: 1/4''-5/8''

Wedge Style Quick Change Tool Post, #0252-0222

• A: 3''
• B: 4-5/8''
• C: 2-3/4''
• D: 5/8''
• E: 1-5/8''
• H: 5-9/16''
• R: 7-5/16''
• Swing: 10"-15''
• d: M16(0.63") x1.5
• H2: 0.63"
• L: 2.25"
• Code: II
• H1: 0.354"
• L1: 1.625"
• Please note customers may need to machine the base plate to make sure the size could fit their lathe

	10"-15" BXA Wedge Type Quick Change Tool Post 8 Pcs/Set, Oversize, Extra Holders	10"-15" BXA Wedge Type Quick Change Tool Post 6 Pcs/Set	10"-15" BXA Piston Type Quick Change Tool Post 6 Pcs/Set
Style of Quick Change Tool Post	Wedge	Wedge	Piston
Number of Holders	8	6	6
Turning & Facing Holder, 250-201	✓	✓	✓
Oversize Turning & Facing Holder, 250-201T	2	0	0
Boring Turning & Facing Holder: 250-202	✓	✓	✓
Boring, Heavy Duty Holder: 250-204	✓	✓	✓
Universal Parting Blade, 250-207	✓	✓	✓
Knurling, Facing & Turning Holder: 250-210	✓	✓	✓

Features & details

Features

• Made of steel. Wedge Style Quick Change Tool Post, 0250-0222. Please be aware: The bottom plate of the tool post may need extra machining to fit your lathe.
• Style 1: Turning & Facing, 0250-0201; Style 1: Extra XL Oversize Turning & Facing, 0250-0201XL (2 pieces)
• Style 2: Boring Turing & Facing, 0250-0202
• Style 4: Boring, Heavy duty, 0250-0204
• Style 7: Universal Parting Blades, 0250-0207 and Style 10: Knurling, Facing & Turning, 0250-0210

Product information

Videos

1. For this product

   

   1:36

   Select the Size of Quick Change Tool Posts

   Accusize Tools

2. For related products

   

   2:28

   0XA Wedge Type Quick Change Tool Post Set Steel Material

   LLDSIMEX

Share this video with friends

Related posts

1. VeYocilk + Follow Great for fine finishing and semi-finishing，very convenient.

   See more
2. VeYocilk + Follow Great for fine finishing and semi-finishing, such as cast iron foundry.

   See more
3. VeYocilk + Follow High grip strength, impact resistance,strong and clear speed advantage in cutting off a large margin and processing

   See more
4. TJATSE® + Follow Find the insert and/or grade here for achieving high quality metal turning, cutting, grooving profiles with excellent chip control and surface finish.

   See more
5. Fafeicy + Follow Fafeicy 100mm 4" CNC ## Lathe Carbide Turning Tools Holder Set ## MGEHR1616-2 Holder ## Wrench MGEHR1616-2 with 10PCS MGMN200-G Carbide Turning Insert

   See more

---

Customer reviews

4.6 out of 54.6 out of 590 global ratings

---

Reviews with images

---

Top reviews from the United States

John Blancuzzi5.0 out of 5 starsVerified Purchase Half the fun is the install! Reviewed in the United States on May 20, 2020Size: AXA, for Lathe Swing 6" - 12"

After unboxing and evaluating what my next move would be, I decided against modifying the compound slide in the event I want to revert it back to original (for whatever reason). Anyway, the bolt that is on my Smithy 3-in-1 compound slide was a M10x18. This is way too small... See more After unboxing and evaluating what my next move would be, I decided against modifying the compound slide in the event I want to revert it back to original (for whatever reason). Anyway, the bolt that is on my Smithy 3-in-1 compound slide was a M10x18. This is way too small for the 9/16 hole in the new AXA toolpost. So I took a grade 8 bolt, chuck it up in the lathe and turned it down to fit the hole. I then bored and tapped it to M8x18 and use it to lock down the ne toolpost. Works flawlessly and looks great! I mean, looks are important when machining. Hope this helps! 14 people found this helpful Helpful Report ichiban5.0 out of 5 starsVerified Purchase Great low priced alternative to the big name brands Reviewed in the United States on January 20, 2021Size: BXA, for Lathe Swing 10" - 15" I''m all for quality when it counts but I''m a fabricator in my home shop not a real machinist. I have a 15" x 40" lathe and purchased the BXA size. I realize by the book I should be using the CXA but I''ve seen several Aloris BXA''s working perfectly on similar sized lathes.... See more I''m all for quality when it counts but I''m a fabricator in my home shop not a real machinist. I have a 15" x 40" lathe and purchased the BXA size. I realize by the book I should be using the CXA but I''ve seen several Aloris BXA''s working perfectly on similar sized lathes. Mine fit like a glove.

After a month of home shop use the mechanism remains smooth and all the tool holders work well. I think the fit and finish for the price is very good. Only issue I had is the actuating lever was threaded a bit too far and when fully installed interfered with the release mechanism. I shortened the threaded side of the lever by a thread turn and now nothing interferes and everything is smooth.

I think this quick release tool post is a great value for the home shop guy. I would love to have an Aloris but as a hobby guy I can''t justify the price. This unit is far more accurate and repeatable than I need to be for the work I do. 2 people found this helpful Helpful Report Jason Andrews5.0 out of 5 starsVerified Purchase G4000 9 x 19 lathe owners! Reviewed in the United States on October 23, 2020Size: AXA, for Lathe Swing 6" - 12" DO NOT make the mistake of ordering 1/2" carbide insert holders. With the OEM current set up you will not be able to get the work centerline without major modification to the lath. Purchase the recommended size for the lathe, combined with this rock-solid tool post there... See more DO NOT make the mistake of ordering 1/2" carbide insert holders. With the OEM current set up you will not be able to get the work centerline without major modification to the lath. Purchase the recommended size for the lathe, combined with this rock-solid tool post there is plenty of rigidity to produce some serious chips.
Accusize Industrial Tools Axa is of premium quality and it has proven itself in my shop for repeatable setups and tight tolerances. If your upgrading your base lathe setup, BITE THE BULLET AND BUY IT, you won''t be disappointed. 3 people found this helpful Helpful Report DCFusor5.0 out of 5 starsVerified Purchase Great toolpost Reviewed in the United States on October 2, 2020Size: BXA, for Lathe Swing 10" - 15" I love this, it''s a huge upgrade over the one I had on my 12x36 lathe. I did have to remove an amazing amount of metal from the T post mount to make it fit - glad i have a cheap milling machine. Worth it all the way. Chatter go bye bye. Tools repeatable with dials.... See more I love this, it''s a huge upgrade over the one I had on my 12x36 lathe. I did have to remove an amazing amount of metal from the T post mount to make it fit - glad i have a cheap milling machine. Worth it all the way.
Chatter go bye bye. Tools repeatable with dials. Just a great improvement.
Other tools from this brand have made me happy as well. 2 people found this helpful Helpful Report jeremy4.0 out of 5 starsVerified Purchase Great buy. Reviewed in the United States on August 22, 2020Size: BXA, for Lathe Swing 10" - 15" These are amazing for the price. I am not a full time machinist just a hobbyist so buying an amorous is out of the question. I have found this to work very well. And I am very happy with the quality. Nice and sturdy for all operations. 2 people found this helpful Helpful Report bill5.0 out of 5 starsVerified Purchase Excellent👍 Reviewed in the United States on February 8, 2019Size: BXA, for Lathe Swing 10" - 15" Repeats every time. I''m usually not impressed with offshore tools, but this quick change tool post is awesome. I''ve purchased other Accusize tools and measuring instruments and have become a fan of the company. 6 people found this helpful Helpful Report D5.0 out of 5 starsVerified PurchaseEarly Reviewer Rewards Great quality Reviewed in the United States on July 11, 2019Size: AXA, for Lathe Swing 6" - 12" Great quality and the post holds on to the dovetails very securely. I have the toolpost mounted on a surface ground cast iron slide but I had to put a dab of silicon carbide lapping compound between the post and the slide to keep it from rotating during heavy cuts. It might... See more Great quality and the post holds on to the dovetails very securely. I have the toolpost mounted on a surface ground cast iron slide but I had to put a dab of silicon carbide lapping compound between the post and the slide to keep it from rotating during heavy cuts. It might just be that the cast iron was ground too smooth since I didn''t have this issue on other lathes. 2 people found this helpful Helpful Report StrangeDoktor1.0 out of 5 starsVerified Purchase Too Big Reviewed in the United States on August 12, 2019Size: AXA, for Lathe Swing 6" - 12" Tool description says it fits a 6-12 inch lathe, but its way too big for my 8 inch lathe. I''ll try to fabricobble something to make it work. 3 people found this helpful Helpful Report

---

Top reviews from other countries

Leo from Ladner5.0 out of 5 starsVerified Purchase Product looks great and works smoothly, and holds well. Reviewed in Canada on October 13, 2021 Great product. The CXA model fits my 1550 very nicely, the extra large holders to accept 1 inch tools is a nice addition. Report

---

See all reviews

---

How customer reviews and ratings work

Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.Learn more how customers reviews work on Amazon

Brief content visible, double tap to read full content.Full content visible, double tap to read brief content. Brief content visible, double tap to read full content.Full content visible, double tap to read brief content. Brief content visible, double tap to read full content.Full content visible, double tap to read brief content.

You are here

a-link-normal" href="/gp/site-directory">Department Industrial & Scientific Cutting Tools Tool HoldersShow more