Works with All Wireless Charging Compatible Phones 10W Fast Charging (requires QC2.0/3.0 car charger): Galaxy S22 /S22+/S22 Ultra / S21/S20/S20+ (Plus)/S20 Ultra/Z Flip 3/S10e; 7.5W Fast Charging (requires QC2.0/3.0 car charger): iPhone iPhone 13/iPhone 13 Pro Max/iPhone 13 Pro/iPhone 13 Mini/iPhone 12 Pro/ iPhone 12 Pro Max/ iPhone 12/ iPhone 12 Mini/11 Pro Max/ 11 Pro/11/Xs Max /XS/X /XR/8/ 8 Plus 5W Standard Wireless Charging (requires 5V/2A car charger)): All Qi-enabled phones, such as Galaxy S6/S6 Edge, Pixel 3/3XL, Nexus 6P, and more. If There is an Issue with Wireless Charging/Fast Charging, Please Pay Attention to the Following Reasons: (1) Make sure your phone supports Qi wireless charging. (2) Use qualified QC 3.0/QC 2.0 car charger/adapter (NOT INCLUDED). (3) The thickness of the phone case is less than 4mm. (4) No metal objects, credit cards, pop holders, or magnetic pads on the back of the phone/case. (5) Adjust the bottom feet to keep the phone''s Qi coil properly aligned with the mount’s LED ring (Qi charging area) (6) Make sure the cable and port are properly connected. How to Assemble Phone Holder and Base? Step 1. Unscrew the knob; Step 2. Pass the knob through the ball head, and then tightly push it into the socket of the cradle; Step 3. Tighten the knob. How to Install? Dashboard Mounting Step 1. Clean Find a flat surface on your car’s dashboard, clean and dry the mounting surface with the cloth. Step 2. Tear off Peel protective films off the suction cup and stabilizer, attach them securely to the dashboard. Step 3. Lock Pull down the lever to lock, then press the stabilizer for 10s to ensure a firm adhesive grip. Step 4. Remove To remove the suction cup, simply unlock the lock lever and pull up the small tab slowly. Note: Please do not pull the mount directl

Product information