[NOTE;ATTENTION PLEASE]:
FAQ1;Why does my phone not charge/so slowly/drain the battery? For 15W, 10W, 7.5W fast charging modes, QC 3.0 car charger adapter is required as its power,supply standard is 5V 2A. the wireless car charger mount charges slowly or intermittently if the voltage falls below par,may lead to charger cuts off and on resulting.If you got a big heavy phone, be sure the Charging Coil alignment,Please adjust the bottom bracket to make the phone at the Qi- wireless charging Inductive center,to achieve the best charging effect.It will fail to charge if placed improperly.GPS navigation or playing music may have impact on the charging speed. rate of battery consumption may be higher than the charging.
FAQ2;Why do the side arms won''t work, Try to unplug the charging cable and plug it in again，Plug the cable into the QC2.0/3.0 car charger to ensure the motor has enough electricity when you release/clamp the phone, otherwise the side arms will not work.
FAQ3;Why does the led indicator keep blinking? Led indicator is red in standby model, it will turn to blue when charging and keep blinking when there is foreign object detected. If the light keeps blinking, please check if there is any metal, magnet, kickstand between your phone and the charger. Remove these items and try again. In addition, the case must be less than 6 mm. If the case is too thick, please remove it and try again.
FAQ4;How to maintain the stability of the suction cup? When installing the suction cup, if the suction cup lock button is locked, you should first open the lock button instead of directly attaching it to the dashboard or windshield. After opening the lock button, paste the suction cup base to the dashboard or windshield, and press the suction cup base until there is no air gap between the base and the dashboard, and then lock the button.

Product information